How to Clean Tanning Bulbs

Owning a tanning bed means you will have to set aside time to remove the acrylics and bulbs occasionally to clean them of dirt and dust and dead skin cells. Whether you have a tanning salon or a tanning bed at home, it should be a monthly task that you set aside time for to remove the acrylics and the bulbs and clean it all thoroughly. If dust builds up you won’t tan as quickly or as evenly as you did before they got dirty. While it may seem that because you’re not tanning as quickly you might need to replace the bulbs, that is a mistaken belief. Many times as they might just need a thorough cleaning!

Tanning bulbs gather dead skin, dirt and dust and it accumulates on the tanning bulb and doesn’t allow for the UV rays to get through and causes your tan to take longer to build up and could also tan you unevenly. Take time on a monthly basis to clean off the bulbs. It will take an hour or so and you may want to recruit some help but it will help extend the life of your bulbs.

The first step in cleaning the bulbs is to remove the clear acrylic panels and set them aside. Read the instructions that came with your bed to find how to properly remove the panels. Lay down a clean sheet and then remove the tanning bulbs and lay them on the sheet. Never stand the bulbs on end as they can easily break.

Caution should be used at all times when handling the bulbs because you don’t want to break the filaments or the bulbs themselves.  Wrap the bulbs in a clean, dry cloth and pull the cloth from top to bottom of the bulb to gently remove all of the dust. After you’ve cleaned the bulb, set it aside onto a clean sheet so it doesn’t pick up the dust from the sheet. Using a clean cloth for each bulb should be the plan so you don’t transfer any dust from one bulb to another.

Replace the bulbs gently back into the bed with the second person helping you ease them back into the bed without bumping into another bulb or the edge of the bed itself. Once all of the bulbs have been replaced, place the thoroughly cleaned acrylic panels back into the tanning bed and you should be ready to go. 

Tips for Changing Out Tanning Lamps

People use tanning beds for many reasons - to get a base tan before a vacation and for getting a tan when the sun or a tanning salon is just not an option. But as any tanning bed owners will tell you, there are times when you begin to notice that your tanning time is not as productive as normal. Don't fret! Chances are you just need to change out the tanning bulbs. Changing out bulbs is simple enough and can be done easily by yourself.

1. First, determine how many bulbs you'll need, what type, and purchase said lamps. A great place to look is online, as often bulbs are cheaper and just as good of quality as stores.
2. Next, grab a clean cotton cloth so you can clean the acrylic cover. Once the bed is apart, use your cloth to clean away all of the dust and debris.
3. After you have removed the old, burnt out tanning bulbs, install the new ones, handling the bulbs with care (as the insides are hazardous).
4. Once the new bulbs have been installed, gently clean off any fingerprints with the soft cloth.
5. Replace the acrylic cover and give it a once over with the cloth to remove fingerprints from that as well.
6. Test the tanning bed once you've installed the bulbs. Make certain all of the newly installed tanning bulbs are working properly then let the bed run for a while to make certain none of the bulbs burn out (this could happen if they are incorrectly installed)

Take care in disposing of the old tanning bulbs - they cannot be tossed in with regular garbage. Place them in a separate container when tossing them out, or look up online for a safe place to dispose of them in your city.